Most Popular
Shower Waterproofing
from $495Complete strip, membrane, fall & seal systems for standard and custom showers — usually finished in one day.
Explore service
What we do
Nine services.
Nine services.
One standard of work.
Every job below is delivered by the same crew, to the same standard, with the same flood testing and written warranty — whichever service you need.
Most Popular
Emergency 24/7
Leak Detection & Repairs
from $395Thermal, acoustic and moisture-trace diagnostics that find the leak before anyone starts breaking tiles.
Explore service
Apartment Friendly
Balcony & Deck Waterproofing
from $145/m²Indoor-outdoor decks that stay dry, from new builds to failed membranes in occupied apartments.
Explore service
Full Wet Area
Bathroom Waterproofing
from $1,250Whole-of-bathroom membrane systems for renovations, extensions and new builds.
Explore service
Kitchen & Splashback Sealing
from $395Benchtop-to-splashback junctions, sinks and floor edges resealed properly — not just re-silicone.
Explore service
Specialist
Pool & Spa Waterproofing
Custom quoteChloride-resistant, bondable membranes for pools, spas, water features and planters.
Explore service
Tiling & Grout Regrouting
from $295Epoxy and cementitious regrouting that restores colour, kills mould and outlasts the original job.
Explore service
Tile & Structural Repairs
Custom quoteCracked, lifted or missing tiles replaced with matched stock and invisible joints.
Explore service
Investigate First
Rising Damp & Mould Control
from $690Cause-first damp investigation and remediation for Sydney homes, terraces and rentals.
Explore service
Pricing
Published prices,
Published prices,
no "call for a quote" games.
These are real starting prices for standard jobs in metropolitan Sydney. Final pricing is confirmed in writing after photos or an inspection, and it does not move once agreed.
| Service | Starting at | Includes | |
|---|---|---|---|
| Shower reseal, standard | from $495 | 1 day, usable again in 24 hours | Get quote |
| Shower reseal, custom / large | from $780 | 2 days, includes a new linear drain | Get quote |
| Balcony membrane, per m² | from $145 | Includes strip, membrane and new falls | Get quote |
| Full bathroom waterproofing | from $1,250 | Floor to ceiling system, 2-3 days | Get quote |
| Kitchen / splashback resealing | from $395 | Same day, all benchtop junctions | Get quote |
| Rising damp treatment, per m² | from $85 | Salt render, fully breathable system | Get quote |
| Leak detection & diagnostic | from $290 | Thermal imaging, moisture meter, written report | Get quote |
Prices assume straightforward access and standard materials. Pre-existing tile removal, structural repair or asbestos-containing products are quoted separately and always flagged before work begins.
How it works
Our waterproofing process in five clear steps.
No mystery, no surprise invoices. You know exactly what is happening, when, and what it costs — from the first phone call to the final warranty certificate.
01
Book & Assess
Call, message or send photos. We respond within the hour and confirm a fixed price before committing to a visit.
02
Diagnose Properly
On-site pressure, flood and moisture testing with thermal imaging to pinpoint the actual failure — no guesswork.
03
Strip & Prepare
Old sealant, grout and membrane removed, substrate repaired, primed and ready. Full protection and dust extraction.
04
Waterproof & Seal
Bond-breaker, primer, membrane coats, falls and flexible sealant applied to specification with correct joint profiles.
05
Test & Document
Flood test, photographic report, warranty certificate issued and the space handed back ready to use.
Current offers
A few ways to pay less.
Conditions apply on all offers. Ask our team when you book — we will always honour the best available rate.
0yrs
Waterproofing experience
0+
Wet areas protected
0%
Leaks stopped first visit
0/5
Google rating
Good to know
Frequently asked questions
Straight answers to the questions we are asked most often across Sydney.
How much does waterproofing cost in Sydney?
A standard shower strip and re-seal starts at $495 and typically completes in one day. Balconies are priced from $145 per square metre, full bathroom membrane systems from around $1,250, and kitchens or splashback resealing from $395. Every quote we issue is fixed and itemised after seeing photos or completing an inspection — you will never receive a bill higher than the agreed price.
Do you actually remove tiles?
In the majority of cases, no. Around nine out of ten leaking showers we see are caused by failed grout and sealant at the wall-to-floor junction, which can be resolved with a complete strip, membrane and re-seal without touching a single tile. We will only recommend tile removal where the substrate or the existing membrane has genuinely failed, and we will show you the evidence before recommending it.
How quickly can someone attend?
Same-day appointments are usually available across metropolitan Sydney, and our emergency service operates 24 hours a day including weekends and public holidays. For an active leak that is causing damage we aim to have a crew on site within a few hours of your call to stop the water first, then quote the permanent repair.
How long until the shower can be used?
Membrane systems need between 24 and 48 hours to cure before water exposure depending on the product, temperature and humidity. We will always tell you the exact cure time for your job on the day, and for most shower reseals you can use the shower again the following day.
What does your warranty cover?
Our membrane systems carry a written structural warranty of up to 15 years and sealants up to 5 years, issued as a certificate with photographic records of the installation. The warranty covers labour and materials for the waterproofing work we performed. If anything we installed fails within that period, we return and rectify it at no cost.
Are you licensed and insured?
Yes. We hold full public liability and workmanship cover, our applicators are accredited for the membrane systems we install, and every completed job is documented and issued to you for your builder, tiler or insurer. Licence details appear on all quotes and invoices.
Do you work with insurers and body corpora?
Routinely. We prepare photographic investigation reports, scope-of-works documentation and certificates of compliance that insurers and strata schemes accept, and we can liaise directly with the appointed builder or assessor to keep the claim moving.
What areas do you service?
We cover all of metropolitan Sydney and most of greater NSW, including the Northern Beaches, the Blue Mountains, the Southern Highlands and the Hawkesbury. If you are just outside our radius, call us — we travel further for larger works.
Ready when you are
Not sure which service you need?
Send a few photos and describe what you are seeing. We will tell you what is most likely happening and whether it is a waterproofing job at all.